This is a wooden carving made from Birch and an environmentally conscious composite core. Each of these carvings has been sanded by to remove the majority of the burrs, as well as being hand-stained.

There is no back in this piece.

Can be used standing up on a surface or hung in a pass through doorway with the included L-bracket. The L-bracket is uninstalled, but you can install it with the included screw. There is a reference mark on the shelf itself for exactly where the bracket is to be installed, as shown in the last picture on this listing. You'll need to drill a small hole about 1/4" deep on that mark (which is a circle), or make a dimple in the center of the circle to start the screw in the correct place. I do not install the bracket myself in case someone wants to use it as a freestanding shelf, in which case making a permanent hole would ruin the aesthetic.

If hung in a doorway, it should be an open, pass through doorway without a door, so as to not disturb any items you’re displaying in the cutouts when the door opens or closes.

Display items at your own risk as I cannot be held responsible for items which fall off the shelf. Not intended to be used outdoors.

**I include a few small squares of "mounting putty" with each shelf. A small amount can be used to affix a crystal or rock into the cavities of the shelf for more stabilization. Don't use it on any rocks or crystals that can shed, as that will stick to the mounting putty. **

Approximate Overall Dimensions:

9" (both sides from corner to point) x 8-1/2" (from corner to center point) x 1-1/2" Deep.

Shipping weight = 1.8lbs