This is a wooden carving made from Birch and composite. Each of these carvings has been sanded by hand to remove the majority of the burrs.

**This piece is raw and unfinished on both the face and the back. It will either need to be prepped for stain/paint on both sides or otherwise sealed before being hung. You will need to do additional finishing to this product at your own risk.**

Can be used standing up or hung in a pass through doorway with the included L-brackets. Each shelf comes with a square of mounting putty you can use to help secure the items you put inside the shelf.

If hung in a doorway, it should be an open, pass through doorway without a door, so as to not disturb any items you’re displaying in the cutouts when the door opens or closes.

Display items at your own risk as I cannot be held responsible for items which fall off the shelf. Not intended to be used outdoors.

Approximate Overall Dimensions:

14" (both sides from corner to point) x 13-1/2" (from corner to center point) x 1-1/2" Deep Overall thickness of this piece is about 1-1/2".

Shipping weight = 3.75lbs